How To Set Up a Well Water System at Your Place?

It’s estimated that more than 15 million homes in the United States depend on private wells for drinking water. This number is going to increase in the coming future considerably. There are numerous benefits to having your well, but the process can initially appear complex and confusing.

Many individuals wish to have a well of their own but want to learn more about the process of installing one. It’s preferred to talk to a specialized well contractor to learn more. Read our step-by-step guide to well installation to get a better idea of what the procedure looks like.

Picking The Best Spot

A process of initial consultation precedes the well construction. During this period, a contractor will come to your home and determine the best location for drilling the well and installing it.

Drill! Drill! Drill!

Drilling into the ground is the initial phase in the construction process. The hole created from this drilling is where the actual well is going to be. Drilling companies can employ a variety of drilling machines to complete this task more carefully. The drill plows into the ground, breaking through dirt and rock in the process, and all the debris is collected and deposited in a pile, dumpster, or pit.

Well Casing

The casing is a tubular component that is inserted into a drilled well to keep it open. This, in addition to grout, limits groundwater to its subsurface zone and prevents pollutants from interacting with the water. The most common materials used are stainless steel, plastic and carbon steel.

It normally has a diameter of 4–6 inches and runs from the surface to the aquifer.  That becomes the source of groundwater that your well will use. A well cap is used to seal the casing.

Tip: check out the basic guide to owning a well.

Well Screens

These are sediment-filtering devices that keep excess silt and dirt out of the well. They are attached to the casing’s bottoms which allows water to flow through. Slotted pipes, perforated pipes, and continuous slots are the most common screens used.

Grouting

There is normally a small space between the casing and the wall of the hole that has been drilled. The area can then be filled up using different types of grout.

Developing/Cleaning

The procedure of “developing” a well entails cleaning it, and professionals will utilize air/water to blow out any extra silt accumulated at the bottom.

Final Touches

The well pump must be installed to complete the well water installation. The well pump is responsible for sucking up water and delivering it to your residence. You might also ask for a pressure tank to be installed. A pressure tank is used to store water and regulate the pump’s operation. This is also the moment to do a water quality test to ensure that well water is safe to drink.

It’s better to let a water well system expert install the well. A licensed water well system professional will have the skills, equipment and knowledge to suit your well construction needs. Your1Plumber experts will provide you with guidance regarding their well water system and plumbing installation. Contact us to get your personal well installed in Maryland. We also specialize in sewer repairs and kitchen faucets service in Frederick, Silver Spring, Columbia, and Germantown.

Share this post

Leave a Reply

Your email address will not be published. Required fields are marked *